MPG-36 FUEL SAVER™ Safety

Is MPG-36 FUEL SAVER™ safe for the engine?

Some people are skeptic about using MPG-36 FUEL SAVER™ and ask if it is going to break their engine or cause other damage.
MPG-36 FUEL SAVER™ has been tested by our company in over 15 different vehicles covering over two hundred thousand miles without any problem at all. It has proven to provide fuel savings and other benefits. But the biggest proof is that MPG-36 FUEL SAVER™ has been used by millions of people all over the world covering millions of miles and there have been no complaints of its safety on the engine.
Let us explain how MPG-36 FUEL SAVER™ works and help you understand the process.
MPG-36 FUEL SAVER™ goes into the fuel tank and into the engine only where fuel goes, nowhere else. It does not go into the transmission, water pump, electrical system, radiator, brakes, tires or any other place.
MPG-36 FUEL SAVER™ is dissolved in the fuel tank and follows the same path as fuel. MPG-36 FUEL SAVER™ together with the fuel goes through the vehicle’s fuel filters which stop any unwanted particles: only clean fuel can go through. After the fuel filters comes the fuel pump, which brings the fuel from the fuel tank and pushes it toward the fuel injectors. The fuel injectors are like a spray pump, more like a pump you see on a spray bottle. The fuel injectors spray the fuel into the combustion chamber and once the fuel is in there, it is ignited by the spark plug and burned. The smoke is let out through the exhaust. This is the path that MPG-36 FUEL SAVER™ follows and as you see, there aren’t many places where it goes, therefore there is no risk of damage.

What is in the MPG-36 FUEL SAVER™ tablets?

Unlike injector cleaners or any fuel system cleaners that contain solvents, detergents or cleaning agents, MPG-36 FUEL SAVER™ is made of high quality catalyst compounds which help speed up the fuel burning process. Speeding up the burning time enables the fuel to burn more completely, thus reducing the energy loss and exhaust emissions.
The efficiency of a regular engine is between 25-30%, which means that 70% of the energy or 70% of the fuel is just wasted. Most of the energy is wasted through heat and most of the unburned fuel goes out through the exhaust. Part of this is because fuel burns relatively slow when compared to the speed of the moving pistons inside the engine.
When the engine is running, lets say at idle speed, which is around 700 -750 rotations per minute, this means that the piston is moving up and down around 12 times per second. During driving, the engine’s rotating speed can go up to 6000 rpm or even higher in some engines, which means that the piston is moving up and down at around 100 times per second, and as you can imagine, that is very fast, so fast that there is not enough time to burn the fuel completely. That is why sometimes when cars accelerate fast, black smoke comes out of the exhaust. That smoke is inefficiently burned fuel. The smoke in the combustion chambers creates carbon buildup which is harmful for the engine.
When MPG-36 FUEL SAVER™ is used and fuel is burned more efficiently, the carbon build up is being removed because there is no more black smoke to create new carbon.
The use of MPG-36 FUEL SAVER™ minimizes fuel waste and emissions, giving you improved fuel mileage, increased power and smoother running engine.